192.168.1.30 Router Login (Username & Password) - 2024

Login on 192.168.1.30.

Click on the Button below to Access to your 192.168.1.30 IP Address

Login
Most popular Username and Password for 192.168.1.30
  • admin/none
    100%

Comprehensive Guide to Understanding and Using 192.168.1.30

What is 192.168.1.30?

The IP address 192.168.1.30 is a default gateway used by numerous routers and modems. This address grants access to the web interface of the router or modem, enabling you to configure and manage your network settings.

Accessing 192.168.1.30

  1. Connect to the network: Make sure your device is connected to the network of the 192.168.1.30 router or modem.
  2. Open your web browser: You can use any web browser, such as Chrome, Firefox, Safari, etc.
  3. Enter the 192.168.1.30 address: Type "http://192.168.1.30" into the address bar and press Enter. You should now be on the login page of your 192.168.1.30 router or modem.

Logging into 192.168.1.30

Your 192.168.1.30 router or modem will require login credentials. These are typically provided in the device's manual. If you haven't changed the credentials, they'll likely be the default settings, commonly "admin" for the username and password, or "admin" for the username with a blank password field. If you can't log in with the default credentials and don't remember setting new ones, you might need to reset your 192.168.1.30 router or modem to factory settings.

This can be done by holding down the reset button, usually a small button accessible with a pin or paperclip, for around 10 seconds. After the device restarts, try using the default credentials again.

Configuring your 192.168.1.30 Router or Modem

Once logged in, you can adjust various settings for your "192.168.1.30" device:

  • Wi-Fi settings: This includes changing your network name (SSID), password, and encryption type. Make sure to set a strong password to keep your network secure.
  • DHCP settings: Your "192.168.1.30" router or modem uses DHCP (Dynamic Host Configuration Protocol) to assign IP addresses to network devices. You can set the range of these addresses.
  • Firewall and security settings: Adding an extra layer of security to your "192.168.1.30" network can be done here. You can enable or disable a firewall, set up IP or MAC address filtering, and more.
  • Port forwarding: If certain applications need to use specific network ports, you can set up port forwarding rules here.
  • Parental controls: Some "192.168.1.30" routers offer parental controls, which let you limit internet access for certain devices or during certain hours.

Troubleshooting your 192.168.1.30 Router or Modem

If you're having issues connecting to the internet, here are some tips:

  1. Check the physical connections: Ensure all cables are properly plugged in.
  2. Reboot your 192.168.1.30 router: Often, simply restarting your router can solve many problems.
  3. Reset to factory settings: If nothing else works, try resetting your "192.168.1.30" router or modem to factory settings. Remember, this will delete all your configurations.

If problems persist, consider contactingyour internet service provider or the manufacturer of your router or modem. They can provide further assistance tailored to your specific "192.168.1.30" device and network situation.

In conclusion, "192.168.1.30" is a versatile tool for managing and configuring your home or office network. Understanding how to use "192.168.1.30" can help you make the most of your internet connectivity and resolve common network issues. Enjoy seamless networking with "192.168.1.30"!

List of Default Device's Username and Password

Devices using 192.168.1.30 IP Address
Brand/ModelUsername/Password
D-LINK/ECB-3500admin/none

Explanation of "none" Username or Password

When it comes to usernames and passwords, the term "none" typically signifies the absence of any specific entry. In other words, using "none" as a username or password indicates that there is no particular value assigned to that field. This could have several implications:

Username:

If a system or platform allows the username field to be left empty or filled with "none," it suggests that the user is not required to provide a unique identifier. This can be useful in situations where anonymity or lack of personal identification is preferred.

Password:

In the case of passwords, entering "none" means that the user has chosen not to set a password for their account. While this might be allowed in certain contexts, it is generally discouraged for security reasons. Without a password, the account becomes highly vulnerable to unauthorized access, posing a significant risk to personal information and data.

It's important to note that using "none" as a username or password is not a recommended practice in most cases. For usernames, it is generally better to choose a unique identifier to ensure proper identification and avoid confusion. When it comes to passwords, it is crucial to select a strong and secure combination of characters to protect your account from potential breaches.

Remember, the security and integrity of your online accounts should always be a priority, and utilizing proper username and password practices is a fundamental step in safeguarding your digital presence.

Others IP Address:

89 thoughts on “192.168

  1. my identity is already been stolen this organization is still on me though still in files so I can’t prove what they’ve stolen from me I need help they are taking my SSL certificates and just tossing them I’m getting network errors I can’t open files all kinds of stuff my IP address has been reported for everyone my email addresses are already rude I mean I don’t know what to do here

  2. 192.168.1.1 is the default gateway for most routers. It’s crucial to know this IP address when troubleshooting network connectivity issues.

  3. I recently had to configure my router settings, and accessing 192.168.1.1 made it super easy. Thanks for explaining its significance!

  4. Hi there! Do you know if they make any plugins to assist with SEO? I’m trying to get my blog to rank for some targeted keywords but I’m not seeing very good results. If you know of any please share. Kudos!

  5. I’m not that much of a internet reader to be honest but your blogs really nice, keep it up! I’ll go ahead and bookmark your site to come back in the future. Cheers

  6. I need to access the admin console in hopes of providing MAC pass-through so an OLD NETGEAR WGR614v10 that expects an insecure WAN to configure in order to work with legacy devices. This KVD21 branded as T-Mobile is a time eater for certain. Their phone app is very basic. I’ve been a technology consultant for 37 years and deliver the impossible. They changed all of the credentials but to properly spelled dictionary words (asking for hacking). Port scans indicate 53, 80 and 8080 are open. The USB port’s functionality is undocumented. Obviously telnet will not work As I work the issue, I’m going to scan the whole 192.168/32 for a secondary IP binding. The label on the rear states a static IP for it and the admin/pw. I need to reconfigure my security to rule out the issue that all of my browsers fail to prompt for anything other than a password. T-Mobile claims their replacement for the device’s default www page nor the app will permit advanced configuration. I can typically brute force my way around any problem, but it is important to weigh the time versus total cost to make a call to terminate continuing with the equipment. The vendor(s) all state that my level of configuration is not possible, yet it is android/linux at heart and thus unless the operating system was stripped of many, many command line executables, everything is possible. Due to the kind of internet use I have I burned through my 20GB hotspot in 3 days and have a 2.4GHz directional yagi antenna mounted on telescoping PVC with an 18dB gain and sometimes can reach the access point in the structure some 400′ away. I have an amplifier that has always done the job, however the legacy TP-Link Range Extender will not work with IPv6. None of these should be issues, but poor firmware and lack of foresight by the coders is pressing me to buy a SUNHANS Enterprise WiFi Indoor Signal Booster 20W 2.4G 43dBm Wireless Amplifier from China, however shipping time is a month and has always been far beyond the delivery dates, hence air freight = $$$ and the reason I’ve got this piece of junk. The cost is justified, I just need to determine a suitable access point to accept the signal from the exterior antenna and retransmit it to inside and then cancel this T-Mobile garbage. I had a very positive customer service experience and during my conversation with the supervisor who disclosed that many customers request our same thing. That being the case of negligence in management customer service I will not be able to use their services any further nor recommend them to clients.

    Arcadian Technologies Corp. in Taiwan KVD21 Gateway factory id fast5688W is the extent of identifying information I am able to obtain from the vendor. I do not believe them on the basis of their ignorance outside of sales.

  7. A right royal stuff-up. NEVER change anything until you can GUARANTEE all possible scenarios have been logically and COMPREHENSIVELY laid out for the users. Hope you guys are not getting paid for this!

  8. TENGO MAS DE 3 HORAS TRATANDO EL 192.168.188.1 Y ME MANDA A UNA PAGINA QUE NI EXISTE LO BUENO QUE LO COMPRE EN RADIOSHACK Y PEDIRE MI DINERO DE VUELTA PERO ES UNA TOTAL PORQUERIA ESTE APARATO, SOLO PERDIDA DE TEIMPO SIN RESULTADO…

  9. I bought the NR5101 which by the way is not on the list as of now.
    I have had no end of problems with this router, i login with the default username & password and i am asked to change the password, then set the time zone, then it goes to the Wi-Fi configure page, then i click done and then i get this pop-up message – “It is impossible to retrieve the information now. Please try again.”
    That’s as far as i can get as it disconnects the Wi-Fi connection, no difference if i try LAN cable.
    The initial download speeds without getting to the management dashboard are bad for both 5G and 4G and the Wi-Fi 6 is flaky at best.
    My conclusion: Total amateurish approach to dashboard management which you can find much better implemented on other routers and initial firmware is also sub-par going by speeds out-of-the-box.
    I could of got a lemon so ordered another and got the same result.
    I will not buy another ZYXEL product, that’s for sure!

  10. It was not that easy to instal, but I found out how to do it!
    If you want to go directly to your log-in, that doesn’t work.
    I came on this page…
    All you have to do, is to take your users manual from your device, there is a network number given.
    scrol to the list below and search your number there, then click on it.
    You come to your page, then click on the link to your log-in.
    You will be directed to your log-in.
    Enter the standard pass words as shown in your user manual of your divice.
    Then enter the pass word of your sim card, after that, the card is activated en now you can use your mobile internet hotspot!
    I hope this info is clear for people who struggle with the instalation.
    I give 4 stars, it was not as easy as it says.

  11. I can’t set up the id and the password. This is really hard to setup. Could you tell me the easy way to setup the password.

  12. I don’t understand this router, I’ve don’t anything I have to do just to change this router username and password but it’s not working. I can’t even find the credentials. why?

  13. I am pretty sure im using the correct Ip address and everytime it shows “CAN’T REACH THIS PAGE”. Help?

  14. Reason I bought this Wi-fi extender because it was advertised as an ‘easy install’. Not for me!! I want to return it.

  15. No matter what I do the router dose not work. I have spent enough time on this product and want to send it back !

  16. HELP HELP HELP THis IS DRIVING ME CRAZY!!! THEY SAID IT WAS SO EASY. NOT TRUE CAN NEVER get logged on.
    Scam Scam Scam

  17. Be careful not to put in any private tips that can be pinged remotely through your router. I recently bought a new router for one that I was sure a remote portal…I was right!!! However now my new router is flashing and the firewall has been replaced. These ppl are giving us these default iP addresses because they are basically a open source for maleware and apps DLed from GPS,however keep check on your android webkit app that’s how they enter your phone.

  18. I am having the same problem as the other commenters here. I believe this is a scam, and I am reporting this device as such. I would ask for my money back since this doesn’t work at all (will not allow you to sign on), but since it is obviously a scam I know that is just wishful thinking.
    Thanks for wasting my time and money.

  19. This must be a scam. There is no place to log in. All it wants to do is download software and new drivers. I don’t trust them. On the other side am I doing something wrong?

  20. WOW after reading those comments o think 🤔 just wasted my time and money with this internet extender WOW WOW can’t connect to internet after I did the setup

  21. I have new internet and cannot get the HP printer attached to this new internet. HELP IN SIMPLE LANGUAGE.

  22. This peace of shit doesn’t work at all, its all a scam. its not able to connect at all in tried everything but nothing worked!
    whom ever is planning on buying this just don’t, its waste of your time and money thrown!!!!!!!

  23. I have had issues with my internet for months. I was told the cable needed replaced and was then advised to try a new modem. I have the new modem, it is not working any better but I can not get to the event log now. How do I get to the event log. Please advise.

  24. got a wi fi extender everything is working fine but when i try to log in with my routers password it comes back incorrect password i know the password is right i took it off the label on the router, could you help

  25. i can’t open it.
    whats the problem… its says that it cannot be reached the site~ what happened?

  26. Riddle me this, Do all or a batch of routers have the same log in number 192.168.0.1. I thought they were unique and each had their own, that mine was special. Seeing all of you expressing that you’ve forgotten the log in and password. And seek a way to bypass security. I was thinking all of your are fucking with my internet. So someone please tell me, do multiple routers share the same #’s, or are these people really screwing with my internet. Cause a lot of these request are done around the same same dates & times when I changed passwords.

  27. i just realsed that you need to go on the login on thing and then look at the back or where ever your label is on your wifi and look on it if you see somthing like
    username:xxx
    password:xx
    for example everything is on the back of your wifi
    i am glad i found mine
    hope this help if you dont understant you can just reply

  28. When I typed 192.168.027 into my router it says it refused to connect and couldn’t reach the page.

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top